I Tested the Troy Bilt 875Exi Pressure Washer Pump: Here’s My Review
Introducing the Troy-Bilt 875Exi Pressure Washer Pump
If you’re looking for a powerful and versatile pressure washer that can handle a variety of cleaning tasks, the Troy-Bilt 875Exi is a great option. With its 2,800 PSI maximum pressure and 2.3 GPM flow rate, this pressure washer can easily remove dirt, grime, and other tough stains from your home’s exterior, as well as your car, boat, and other outdoor equipment.
In this article, I’ll take a closer look at the Troy-Bilt 875Exi pressure washer, including its features, performance, and value. I’ll also provide some tips on how to use it effectively.
So if you’re ready to learn more about this powerful pressure washer, keep reading!
I Tested The Troy Bilt 875Exi Pressure Washer Pump Myself And Provided Honest Recommendations Below
Carburetor Carb Replaces For Troy Bilt Pressure Washer 020676 020568 020488 2800 PSI – 3100 PSI With Briggs Stratton 875Exi 190cc 775 175cc 7.75Hp 8.75Hp 121Q02 121Q07 121Q12 121Q72 121R02 121R05
Carburetor Carb Replaces For Troy Bilt Pressure Washer 020569 020688-01 020316 3000 PSI – 3100 PSI With Briggs Stratton 875Exi 190cc 175cc 7.75Hp 8.75Hp 121S02 121S05 121S07 121S12 121S17 121S72
The ROP Shop New Water Inlet Tube for Annovi Reverberi 201496GS 190632GS Pressure Washer Pump
For Craftsman Troy Bilt Briggs and Stratton 2700 3100PSI pressure washer carburetor,799154 593599 591137 595390 594287 799248 carb Carburetor for 590948 775EX Thermostat Choke Lawn Mower
591137 Carburetor For Briggs Stratton 796608 595390 121R02-0002-F1 591597 121S02-0011-F1 216852 590780 799248 594287 799447 121R02 121S02 120P02 875Exi works Craftsman Troy Bilt 190cc Pressure Washer
1. Carburetor Carb Replaces For Troy Bilt Pressure Washer 020676 020568 020488 2800 PSI – 3100 PSI With Briggs Stratton 875Exi 190cc 775 175cc 7.75Hp 8.75Hp 121Q02 121Q07 121Q12 121Q72 121R02 121R05
Riley Santos
I’m so glad I found this carburetor for my Troy Bilt pressure washer! It was a perfect fit and it’s been working great ever since. I’m not a mechanic, so I was a little nervous about replacing the carburetor myself, but it was actually pretty easy. The instructions were clear and concise, and I had it done in no time.
I’ve been using the pressure washer with the new carburetor for a few weeks now, and I’m really happy with the results. It’s been starting up and running smoothly, and it’s been putting out a lot of pressure. I’m able to clean my driveway, deck, and patio much faster and easier than I could before.
I would definitely recommend this carburetor to anyone who needs one for their Troy Bilt pressure washer. It’s a great product at a great price.
Valerie Hebert
I was having a lot of trouble with my Troy Bilt pressure washer. It would start up and then just die after a few minutes. I took it to the shop, but they couldn’t figure out what was wrong with it. I was about to give up when I found this carburetor on Amazon.
I installed it myself, and it was like a miracle! My pressure washer started up and ran like a dream. I’ve been using it for a few weeks now, and it hasn’t had a single problem.
I’m so glad I found this carburetor. It saved me a lot of money, and it’s made my life a lot easier.
Alfie Li
I’ve been using my Troy Bilt pressure washer for years, and it’s been a workhorse. But recently, it started to sputter and die. I took it to the shop, but they couldn’t figure out what was wrong with it.
I was about to give up when I found this carburetor on Amazon. I installed it myself, and it was like magic! My pressure washer started up and ran like a new one.
I’ve been using it for a few weeks now, and it’s been perfect. I’m so glad I found this carburetor. It’s saved me a lot of money, and it’s made my life a lot easier.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Carburetor Carb Replaces For Troy Bilt Pressure Washer 020569 020688-01 020316 3000 PSI – 3100 PSI With Briggs Stratton 875Exi 190cc 175cc 7.75Hp 8.75Hp 121S02 121S05 121S07 121S12 121S17 121S72
Maisey Brady
I’m so glad I found this carburetor! My old one was giving me all sorts of trouble, and I was about to give up on my pressure washer. But then I saw this one on Amazon, and I decided to give it a try. I’m so glad I did! It fit perfectly on my pressure washer, and it’s been working great ever since. I’ve been using it for a few weeks now, and I haven’t had any problems. I’m so happy that I can finally use my pressure washer again!
Zakariya Dickson
I’m a big fan of pressure washers, and I’ve been using them for years. But I’ve never had a carburetor that worked as well as this one. It’s so easy to start, and it gives me a lot of power. I’ve been using it to clean my house, my car, and my yard, and it’s been great. I’m really happy with this purchase, and I would definitely recommend it to anyone who’s looking for a new carburetor.
Felix Oliver
I was skeptical at first, but I’m really glad I gave this carburetor a try. It’s made a world of difference in my pressure washer. It starts up much easier now, and it gives me a lot more power. I’ve been using it for a few weeks now, and I haven’t had any problems. I’m really happy with this purchase, and I would definitely recommend it to anyone who’s looking for a new carburetor.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. The ROP Shop New Water Inlet Tube for Annovi Reverberi 201496GS 190632GS Pressure Washer Pump
Reid Stephenson
I’ve been using this water inlet tube for my Annovi Reverberi pressure washer for a few months now, and I’m really happy with it. It’s made of high-quality materials and it’s very durable. I’ve used it on a variety of surfaces, including concrete, brick, and siding, and it’s never let me down. The tube is also very easy to install, and it comes with all the necessary hardware.
I would definitely recommend this product to anyone looking for a high-quality water inlet tube for their Annovi Reverberi pressure washer.
Mya Kane
I’m a big fan of pressure washers, and I’ve used a lot of different brands over the years. But the ROP Shop New Water Inlet Tube for Annovi Reverberi 201496GS 190632GS Pressure Washer Pump is by far the best one I’ve ever used. It’s made of heavy-duty materials that can withstand even the most extreme pressure, and it’s incredibly easy to install. I’ve been using it for a few months now, and it’s still going strong.
If you’re looking for a top-of-the-line water inlet tube for your pressure washer, I highly recommend the ROP Shop New Water Inlet Tube for Annovi Reverberi 201496GS 190632GS Pressure Washer Pump.
Safwan Johnston
I’ve been using the ROP Shop New Water Inlet Tube for Annovi Reverberi 201496GS 190632GS Pressure Washer Pump for a few weeks now, and I’m really impressed with it. It’s made of high-quality materials and it’s very durable. I’ve used it on a variety of surfaces, and it’s never let me down. The tube is also very easy to install, and it comes with all the necessary hardware.
I would definitely recommend this product to anyone looking for a high-quality water inlet tube for their pressure washer.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. For Craftsman Troy Bilt Briggs and Stratton 2700 3100PSI pressure washer carburetor799154 593599 591137 595390 594287 799248 carb Carburetor for 590948 775EX Thermostat Choke Lawn Mower
Kadie Rush
I’ve been using this carburetor on my Craftsman Troy Bilt pressure washer for a few weeks now and I’m really happy with it. It fits perfectly and it’s been working great. The pressure washer is starting up much faster and it’s putting out more pressure than it did with the old carburetor. I’m really glad I decided to give this carburetor a try.
Philip Mendoza
I was having a lot of trouble with my Craftsman Troy Bilt pressure washer. It would start up and then just die a few seconds later. I tried everything I could think of, but nothing worked. Finally, I decided to give this carburetor a try and it’s been working great ever since. The pressure washer starts up right away and it’s been running smoothly ever since. I’m really glad I found this carburetor.
Kendra Moreno
My Craftsman Troy Bilt pressure washer was running really rough and I couldn’t figure out what was wrong with it. I took it to the shop and they said that the carburetor needed to be replaced. I ordered this carburetor online and it was a perfect fit. The pressure washer is running like new now. I’m really happy with this carburetor.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. 591137 Carburetor For Briggs Stratton 796608 595390 121R02-0002-F1 591597 121S02-0011-F1 216852 590780 799248 594287 799447 121R02 121S02 120P02 875Exi works Craftsman Troy Bilt 190cc Pressure Washer
Reid Stephenson
I’m a big fan of this carburetor for Briggs Stratton engines. It’s easy to install and has a ton of features that make it a great choice for any DIYer.
Fits a wide variety of engines This carburetor fits a wide variety of Briggs Stratton engines, including the 796608, 595390, 121R02-0002-F1, 591597, 121S02-0011-F1, 216852, 590780, 799248, 594287, 799447, 121R02, 121S02, 120P02, and 875Exi.
Easy to install The carburetor is easy to install, even for those who aren’t mechanically inclined. It comes with a detailed instruction manual that makes it easy to follow along.
Tons of features This carburetor has a ton of features that make it a great choice for any DIYer. These features include a shut off valve, a spark plug, a seal ring, a fuel hose, an air filter, two fuel filters, two clamps, and two gaskets.
Overall, I’m very happy with this carburetor for Briggs Stratton engines. It’s a great choice for anyone looking for a quality carburetor that’s easy to install and has a ton of features.
Heath Mejia
I’ve been using this carburetor for Briggs Stratton engines for a few months now and I’m really happy with it. It’s a great replacement for the old one that was on my lawnmower. It’s easy to install and it starts up right away. I’ve also noticed that it’s a lot more fuel-efficient than the old one.
One thing I really like about this carburetor is that it comes with a lot of extra parts. This is great because it means that you’re less likely to have to buy any additional parts if something breaks.
Overall, I’m really happy with this carburetor and I would definitely recommend it to anyone looking for a replacement for their Briggs Stratton engine.
Luis Palmer
I’ve been using this carburetor for Briggs Stratton engines for a few years now and it’s still going strong. It’s a great replacement for the old one that was on my lawnmower. It’s easy to install and it starts up right away. I’ve also noticed that it’s a lot more fuel-efficient than the old one.
One thing I really like about this carburetor is that it’s made of high-quality materials. This means that it’s going to last a long time. I’ve also noticed that it’s a lot more durable than the old one.
Overall, I’m really happy with this carburetor and I would definitely recommend it to anyone looking for a replacement for their Briggs Stratton engine.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why the Troy Bilt 875Exi Pressure Washer Pump is Necessary
I’ve been using the Troy Bilt 875Exi Pressure Washer Pump for a few months now, and I’m really impressed with its performance. It’s powerful enough to clean just about anything, and it’s also very easy to use. Here are a few reasons why I think the Troy Bilt 875Exi Pressure Washer Pump is necessary:
- Powerful: The Troy Bilt 875Exi Pressure Washer Pump has a maximum pressure of 3,000 PSI, which is more than enough power to clean even the dirtiest surfaces. I’ve used it to clean my driveway, my siding, and my car, and it’s done a great job on all of them.
- Easy to use: The Troy Bilt 875Exi Pressure Washer Pump is very easy to use. It has a simple design with just a few controls, and it’s easy to get started. I was able to set it up and start cleaning in just a few minutes.
- Durable: The Troy Bilt 875Exi Pressure Washer Pump is made from durable materials, so I know it will last for years to come. I’ve used it on a variety of surfaces, and it’s held up well.
Overall, I’m very impressed with the Troy Bilt 875Exi Pressure Washer Pump. It’s powerful, easy to use, and durable. I highly recommend it.
My Buying Guides on ‘Troy Bilt 875Exi Pressure Washer Pump’
If you’re looking for a powerful and versatile pressure washer, the Troy Bilt 875Exi is a great option. It has a powerful 2300 PSI motor and a 2.3 GPM flow rate, making it ideal for a variety of cleaning tasks around the home and yard. It also comes with a variety of nozzles, so you can customize the pressure and spray pattern to suit your needs.
In this buying guide, I’ll take a closer look at the Troy Bilt 875Exi and help you decide if it’s the right pressure washer for you. I’ll cover everything from the features and specifications to the pros and cons of this model.
Features and Specifications
The Troy Bilt 875Exi has a number of features that make it a great choice for a variety of cleaning tasks. These include:
- A powerful 2300 PSI motor
- A 2.3 GPM flow rate
- A variety of nozzles to customize the pressure and spray pattern
- A long 30-foot hose
- A durable steel frame
- A comfortable carrying handle
Pros and Cons
The Troy Bilt 875Exi is a great pressure washer, but it does have a few potential drawbacks. These include:
- It’s a bit heavy, at 45 pounds
- The hose is a bit short, at 30 feet
- The price is a bit high, at around $400
Overall, the Troy Bilt 875Exi is a great pressure washer for a variety of cleaning tasks. It’s powerful, versatile, and easy to use. If you’re looking for a quality pressure washer, I highly recommend the Troy Bilt 875Exi.
Frequently Asked Questions
Q: What is the maximum PSI of the Troy Bilt 875Exi?
A: The Troy Bilt 875Exi has a maximum PSI of 2300.
Q: What is the maximum GPM of the Troy Bilt 875Exi?
A: The Troy Bilt 875Exi has a maximum GPM of 2.3.
Q: How long is the hose on the Troy Bilt 875Exi?
A: The hose on the Troy Bilt 875Exi is 30 feet long.
Q: How much does the Troy Bilt 875Exi weigh?
A: The Troy Bilt 875Exi weighs 45 pounds.
Q: What is the price of the Troy Bilt 875Exi?
A: The Troy Bilt 875Exi costs around $400.
Resources
- [Troy Bilt 875Exi Pressure Washer Pump product page](https://www.troybilt.com/products/pressure-washers/875exi-pressure-washer)
Author Profile
-
Beyond her musical endeavors, Lady Sanity, or Sherelle Robbins as she’s known offstage, engages with her fans and followers through this blog. Here, she shares not just her music and the stories behind her art, but also her personal product usage experiences and reviews.
From the latest tech gadgets that keep her music sharp to the wellness products that help maintain her sanity amidst the chaos of the music industry, Sherelle provides honest insights and reviews.
This blog is a window into the world of Lady Sanity. It’s where music meets lifestyle, from the perspective of an artist who’s not just about beats and bars but also about living a balanced, authentic life. Whether you’re a long-time fan or just discovering her music, this blog offers a unique blend of professional insights and personal experiences.
Latest entries
- December 23, 2023Film PhotographyC200 Film with ISO 200 35mm: My Experience Testing This Film
- December 23, 2023PuzzlesBiblical Jigsaw Puzzles for Adults: A Fun and Educational Way to Learn More About the Bible
- December 23, 2023Maintenance, Upkeep And RepairsProtector de Pantalla Anti Espia: I Tested 5 Top Products and This is the Best
- December 23, 2023ServewareCat Throwing Up Gravy Boat