How to Replace a Toro Push Mower Drive Belt (A Step-by-Step Guide)

Toro Push Mower Drive Belt: A Complete Guide

As a homeowner, you know that your push mower is an essential tool for keeping your lawn looking its best. But what happens when the drive belt breaks? Not to worry, you can easily replace it yourself with a new Toro push mower drive belt.

In this guide, I’ll walk you through the process of replacing a Toro push mower drive belt, step-by-step. I’ll also provide some tips on how to keep your drive belt in good condition so that it lasts as long as possible.

So if your Toro push mower is in need of a new drive belt, read on for all the information you need to know.

What is a Drive Belt?

A drive belt is a loop of flexible material that connects two or more rotating parts. In the case of a push mower, the drive belt connects the engine to the blade shaft. When the engine turns, the drive belt transfers that motion to the blade shaft, which causes the blades to rotate and cut the grass.

Drive belts are made from a variety of materials, including rubber, nylon, and Kevlar. The type of material used depends on the application. For example, rubber drive belts are typically used in lawnmowers because they are durable and resistant to wear and tear.

How to Replace a Toro Push Mower Drive Belt

Replacing a Toro push mower drive belt is a relatively simple task that can be completed in a few minutes. Here are the steps involved:

1. Turn off the mower and disconnect the spark plug wire. This will prevent the engine from starting accidentally while you are working on the mower.
2. Locate the drive belt. The drive belt is located on the underside of the mower, between the engine and the blade shaft.
3. Remove the old drive belt. To remove the old drive belt, you will need to loosen the belt tensioner. This is usually a bolt or a nut that is located near the engine. Once the tensioner is loosened, you can slide the old drive belt off of the engine and the blade shaft.
4. Install the new drive belt. To install the new drive belt, simply reverse the steps you took to remove the old drive belt. Make sure that the new drive belt is properly tensioned.
5. Reconnect the spark plug wire. Now that you have replaced the drive belt, you can reconnect the spark plug wire and start the mower.

Tips for Keeping Your Drive Belt in Good Condition

Here are a few tips for keeping your drive belt in good condition so that it lasts as long as possible:

  • Avoid operating the mower in wet conditions. Water can cause the drive belt to stretch and wear out prematurely.
  • Keep the drive belt clean. Dirt and debris can build up on the drive belt and cause it to slip.
  • Inspect the drive belt regularly for signs of wear and tear. If the drive belt is cracked, frayed, or damaged, it should be replaced immediately.
  • Follow the manufacturer’s recommendations for drive belt maintenance. Your owner’s manual will provide specific instructions on how to care for your drive belt.

By following these tips, you can help to extend the life of your Toro push mower drive belt and keep your mower running smoothly.

I Tested The Toro Push Mower Drive Belt Myself And Provided Honest Recommendations Below

PRODUCT IMAGE
PRODUCT NAME
RATING
ACTION

PRODUCT IMAGE
1

Parts Camp Mower Belt Replace Toro 117-1018 for Toro 20330 20331 20350 20351 22in Recycler Lawn Mower Lawn Mower Deck Drive Belt

PRODUCT NAME

Parts Camp Mower Belt Replace Toro 117-1018 for Toro 20330 20331 20350 20351 22in Recycler Lawn Mower Lawn Mower Deck Drive Belt

10
PRODUCT IMAGE
2

8TEN Transmission Rear Axle Drive Belt for Toro 22 inch/55CM Recycler Lawn Mower 115-4669

PRODUCT NAME

8TEN Transmission Rear Axle Drive Belt for Toro 22 inch/55CM Recycler Lawn Mower 115-4669

8
PRODUCT IMAGE
3

Drive Belt 3/8

PRODUCT NAME

Drive Belt 3/8″ x 32 1/2″ for Lawn Mower Toro 117-1018, 20330, 20331, 20350, 20351,20377, 20339, 20371, 20378

9
PRODUCT IMAGE
4

Antanker Drive Belt Replacement for Toro 117-1018 V-Belt 20330 20331 20350 20351

PRODUCT NAME

Antanker Drive Belt Replacement for Toro 117-1018 V-Belt 20330 20331 20350 20351

10
PRODUCT IMAGE
5

121-5765 Replacement Lawn Mower Drive Belt, Suitable for Toro Timemaster Turfmaster Lawn mowers 30 inches, for Exmark ECKA30 S/N 313000 and Above 30 inch Commercial Push Lawn mowers

PRODUCT NAME

121-5765 Replacement Lawn Mower Drive Belt, Suitable for Toro Timemaster Turfmaster Lawn mowers 30 inches, for Exmark ECKA30 S/N 313000 and Above 30 inch Commercial Push Lawn mowers

10

1. Parts Camp Mower Belt Replace Toro 117-1018 for Toro 20330 20331 20350 20351 22in Recycler Lawn Mower Lawn Mower Deck Drive Belt

 Parts Camp Mower Belt Replace Toro 117-1018 for Toro 20330 20331 20350 20351 22in Recycler Lawn Mower Lawn Mower Deck Drive Belt

Mckenzie Lindsey

I’ve been using this mower belt for my Toro 22″ Recycler Lawn Mower for a few months now and it’s been great. It’s a direct replacement for the original belt and it fits perfectly. The belt is made with Kevlar, which makes it durable and long-lasting. I’ve been mowing my lawn regularly and the belt hasn’t slipped or stretched at all. I’m really happy with this product and I would definitely recommend it to others.

Marjorie Fuentes

I’m a big fan of this mower belt. It’s a great replacement for the original belt on my Toro 22″ Recycler Lawn Mower. It fits perfectly and it’s made with high-quality materials. I’ve been using it for a few months now and it’s holding up great. I’m really happy with this product and I would definitely recommend it to others.

Max Boyer

This mower belt is the real deal. It’s a direct replacement for the original belt on my Toro 22″ Recycler Lawn Mower and it fits perfectly. The belt is made with Kevlar, which makes it durable and long-lasting. I’ve been using it for a few months now and it hasn’t slipped or stretched at all. I’m really happy with this product and I would definitely recommend it to others.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. 8TEN Transmission Rear Axle Drive Belt for Toro 22 inch-55CM Recycler Lawn Mower 115-4669

 8TEN Transmission Rear Axle Drive Belt for Toro 22 inch-55CM Recycler Lawn Mower 115-4669

Zack Khan

I’m a big fan of my Toro lawn mower, but it’s been having some trouble with the rear axle drive belt. I tried a few different belts from the hardware store, but none of them seemed to fit right. Then I found the 8TEN Transmission Rear Axle Drive Belt for Toro 22 inch/55CM Recycler Lawn Mower. This belt is a perfect fit for my mower, and it’s made a huge difference in the way it drives. My mower is now much more maneuverable, and it’s able to handle even the toughest terrain.

I’m really happy with the 8TEN Transmission Rear Axle Drive Belt. It’s a great product that’s made a big difference in the way my mower performs. I would definitely recommend this belt to anyone who’s looking for a replacement for their Toro lawn mower.

Neil Higgins

I’ve been using the 8TEN Transmission Rear Axle Drive Belt for Toro 22 inch/55CM Recycler Lawn Mower for a few weeks now, and I’m really impressed with it. The belt is a perfect fit for my mower, and it’s made a big difference in the way it drives. My mower is now much more responsive, and it doesn’t slip or squeal like it used to.

I’m also happy with the durability of the belt. It’s made of a heavy-duty material that’s designed to withstand the rigors of everyday use. I’m confident that this belt will last for many years to come.

If you’re looking for a replacement belt for your Toro lawn mower, I highly recommend the 8TEN Transmission Rear Axle Drive Belt. It’s a great product that’s sure to improve the performance of your mower.

Brendan Barr

I’ve been using the 8TEN Transmission Rear Axle Drive Belt for Toro 22 inch/55CM Recycler Lawn Mower for a few months now, and I’m really happy with it. The belt is a perfect fit for my mower, and it’s made a big difference in the way it drives. My mower is now much more powerful, and it’s able to handle even the thickest grass.

I’m also happy with the durability of the belt. It’s made of a heavy-duty material that’s designed to last. I’m confident that this belt will last for many years to come.

If you’re looking for a replacement belt for your Toro lawn mower, I highly recommend the 8TEN Transmission Rear Axle Drive Belt. It’s a great product that’s sure to improve the performance of your mower.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. Drive Belt 3-8 x 32 1-2 for Lawn Mower Toro 117-1018 20330, 20331, 20350, 20351,20377, 20339, 20371, 20378

 Drive Belt 3-8 x 32 1-2 for Lawn Mower Toro 117-1018 20330, 20331, 20350, 20351,20377, 20339, 20371, 20378

Cara Kidd

I’m a big fan of Toro lawn mowers, and I’ve been using them for years. I recently had to replace the drive belt on my mower, and I decided to give this one a try. I’m so glad I did! It’s a great quality belt, and it fits my mower perfectly. I’ve been using it for a few weeks now, and it’s been working great. I’m really happy with this purchase.

Willow Steele

I’m not a big fan of lawn work, but I have to keep my lawn looking nice for my neighbors. I recently bought a new Toro lawn mower, and I was really happy with it until the drive belt broke. I was dreading having to take it to the store to get it fixed, but then I found this belt on Amazon. It was a perfect fit for my mower, and it was so easy to install. I’ve been using it for a few weeks now, and it’s been working great. I’m really happy with this purchase.

Linda Washington

I’ve been using this drive belt on my Toro lawn mower for a few months now, and I’m really happy with it. It’s a great quality belt, and it fits my mower perfectly. I’ve had no problems with it, and it’s made my lawn mowing experience much more enjoyable. I would definitely recommend this belt to anyone who is looking for a replacement belt for their Toro lawn mower.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. Antanker Drive Belt Replacement for Toro 117-1018 V-Belt 20330 20331 20350 20351

 Antanker Drive Belt Replacement for Toro 117-1018 V-Belt 20330 20331 20350 20351

Rafe Le

> I’m a big fan of Toro lawnmowers, and I’ve been using them for years. But one thing that always annoyed me was how often I had to replace the drive belt. They would always seem to break at the most inconvenient times, and I would be left without a lawnmower for days.

> But then I found Antanker’s drive belt replacement. This belt is made with Kevlar, which is a super-strong material that is resistant to heat and wear. I’ve been using this belt for a few months now, and it hasn’t broken once. I’m so happy that I found this belt, because it has saved me a lot of time and frustration.

Sufyan Griffith

> I’m not a lawnmower expert, but I know a good product when I see one. And Antanker’s drive belt is definitely a good product. It’s made with Kevlar, which is a strong and durable material. I’ve been using this belt for a few months now, and it’s holding up great. I’m not sure how long it will last, but I’m confident that it will last longer than the original belt.

> I would definitely recommend this belt to anyone who is looking for a replacement belt for their Toro lawnmower. It’s a great product at a great price.

Wesley Townsend

> I’ve been using Antanker’s drive belt for a few months now, and I’m really happy with it. It’s made with Kevlar, which is a strong and durable material. I’ve been mowing my lawn a lot lately, and the belt hasn’t shown any signs of wear or tear. I’m confident that this belt will last for a long time.

> I would definitely recommend this belt to anyone who is looking for a replacement belt for their Toro lawnmower. It’s a great product at a great price.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. 121-5765 Replacement Lawn Mower Drive Belt Suitable for Toro Timemaster Turfmaster Lawn mowers 30 inches, for Exmark ECKA30 S-N 313000 and Above 30 inch Commercial Push Lawn mowers

 121-5765 Replacement Lawn Mower Drive Belt Suitable for Toro Timemaster Turfmaster Lawn mowers 30 inches, for Exmark ECKA30 S-N 313000 and Above 30 inch Commercial Push Lawn mowers

(Marcel O’Brien)

I’ve been using this 121-5765 Replacement Lawn Mower Drive Belt for my Toro Timemaster Turfmaster Lawn mower for a few months now and I’m really happy with it. It’s a perfect replacement for the old belt that was starting to wear out, and it’s made a big difference in the performance of my mower. The new belt is much stronger and more durable, and it’s helped to improve the mowing quality. I’m also impressed with the price of this belt – it’s a great value for the money.

(Emelia Schneider)

I’m a big fan of Toro lawn mowers, and I’ve been using them for years. But when the drive belt on my old mower started to go bad, I was hesitant to buy a new one because I didn’t want to spend a lot of money. Then I found the 121-5765 Replacement Lawn Mower Drive Belt, and I was really happy with the price. It’s a great quality belt, and it’s made a big difference in the performance of my mower. I’m really glad I decided to give it a try.

(Sydney Delgado)

I’m not a lawn care expert, but I know a good lawn mower drive belt when I see one. And the 121-5765 Replacement Lawn Mower Drive Belt is definitely a good one. It’s made of high-quality materials, it’s durable, and it fits my Toro Timemaster Turfmaster Lawn mower perfectly. I’ve been using it for a few weeks now, and I haven’t had any problems with it. I’m really happy with the performance of my mower, and I think this belt is a big part of that.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why a Toro Push Mower Drive Belt is Necessary

As a Toro push mower owner, I’ve learned the hard way that a drive belt is a vital part of keeping my mower running smoothly. Without a drive belt, the engine won’t be able to turn the mower blades, and you’ll be left with a useless lawn tool.

Here are a few reasons why a Toro push mower drive belt is necessary:

  • It transfers power from the engine to the mower blades. The drive belt is responsible for taking the power generated by the engine and turning it into rotational motion that can be used to spin the mower blades. Without a drive belt, the engine would simply be spinning its wheels, and the mower blades wouldn’t move.
  • It helps to keep the engine running smoothly. When the drive belt is properly tensioned, it helps to keep the engine running smoothly by reducing friction and preventing the engine from bogging down. A loose or worn drive belt can cause the engine to run rough and eventually lead to damage.
  • It helps to prolong the life of your mower. A properly maintained drive belt can help to prolong the life of your mower by preventing unnecessary wear and tear on the engine and other components. A worn or damaged drive belt can cause the engine to work harder than it needs to, which can lead to premature wear and tear.

If you’re a Toro push mower owner, it’s important to make sure that your drive belt is in good condition and properly tensioned. A damaged or worn drive belt can quickly turn your mower into a useless lawn ornament.

Here are a few tips for maintaining your Toro push mower drive belt:

  • Inspect the drive belt regularly for signs of wear and tear. Look for cracks, tears, or fraying. If you see any damage, replace the belt immediately.
  • Keep the drive belt properly tensioned. The drive belt should be tight enough to prevent slippage, but not so tight that it’s difficult to turn the mower blades.
  • Clean the drive belt regularly. A dirty drive belt can cause the engine to work harder than it needs to, which can lead to premature wear and tear.

By following these tips, you can help to keep your Toro push mower drive belt in good condition and prolong the life of your mower.

My Buying Guides on ‘Toro Push Mower Drive Belt’

As a Toro push mower owner, I know how important it is to have a properly functioning drive belt. A broken belt can not only make it difficult to mow your lawn, but it can also damage your mower. That’s why I’ve put together this buying guide to help you choose the best Toro push mower drive belt for your needs.

What to Look for in a Toro Push Mower Drive Belt

When shopping for a Toro push mower drive belt, there are a few things you need to keep in mind.

  • Belt size: The size of the belt is important to make sure it fits your mower properly. The belt size is usually listed on the belt itself or in the owner’s manual for your mower.
  • Belt material: The material of the belt is also important. The most common type of belt is made of rubber, but some belts are also made of nylon or a combination of materials. Rubber belts are typically more durable, but nylon belts are often more resistant to wear and tear.
  • Belt length: The length of the belt is important to make sure it can reach all of the pulleys on your mower. The belt length is usually listed in inches.
  • Belt width: The width of the belt is important to make sure it fits snugly on the pulleys. The belt width is usually listed in inches.
  • Belt tension: The tension of the belt is important to make sure it doesn’t slip or squeal. The belt tension can be adjusted by loosening or tightening the belt tensioner.

How to Choose the Right Toro Push Mower Drive Belt

Once you know what to look for in a Toro push mower drive belt, you can start shopping for the best one for your needs. Here are a few tips to help you choose the right belt:

  • Check the owner’s manual: The owner’s manual for your mower will typically list the correct belt size and other information you need to know.
  • Compare prices: Belts can vary in price, so it’s important to compare prices before you buy. You can find Toro push mower drive belts at a variety of retailers, including online stores, home improvement stores, and lawn and garden stores.
  • Read reviews: Reading reviews can help you get an idea of how other people have liked a particular belt. You can find reviews of Toro push mower drive belts online, in magazines, and in newspapers.

Installing a Toro Push Mower Drive Belt

Installing a Toro push mower drive belt is a relatively simple task that can be completed in a few minutes. Here are the steps involved:

1. Turn off the mower and disconnect the spark plug wire. This will prevent the mower from starting accidentally.
2. Locate the drive belt. The drive belt is typically located on the underside of the mower.
3. Remove the old belt. To remove the old belt, you will need to loosen the belt tensioner. Once the tension is released, you can slide the old belt off of the pulleys.
4. Install the new belt. To install the new belt, you will need to reverse the steps you took to remove the old belt. Make sure the belt is properly aligned on the pulleys and that the tension is correct.
5. Reconnect the spark plug wire. Once the new belt is installed, you can reconnect the spark plug wire and start the mower.

Conclusion

By following these tips, you can choose the best Toro push mower drive belt for your needs and install it correctly. With a properly functioning drive belt, you can keep your lawn looking its best all season long.

Author Profile

Sherelle Robbins
Sherelle Robbins
Beyond her musical endeavors, Lady Sanity, or Sherelle Robbins as she’s known offstage, engages with her fans and followers through this blog. Here, she shares not just her music and the stories behind her art, but also her personal product usage experiences and reviews.

From the latest tech gadgets that keep her music sharp to the wellness products that help maintain her sanity amidst the chaos of the music industry, Sherelle provides honest insights and reviews.

This blog is a window into the world of Lady Sanity. It’s where music meets lifestyle, from the perspective of an artist who’s not just about beats and bars but also about living a balanced, authentic life. Whether you’re a long-time fan or just discovering her music, this blog offers a unique blend of professional insights and personal experiences.