How to Replace the Primer Bulb on a Husqvarna Chainsaw (Tested and Proven)

Primer Bulb for Husqvarna Chainsaw: A Quick Guide

If your Husqvarna chainsaw is not starting, it may be due to a faulty primer bulb. The primer bulb is a small, rubber bulb located on the side of the chainsaw. When you squeeze the bulb, it forces fuel from the tank into the carburetor, helping to prime the engine and make it easier to start.

If the primer bulb is damaged or worn out, it will not be able to properly prime the engine, and your chainsaw will be difficult to start. Replacing the primer bulb is a relatively simple task that can be completed in a few minutes. In this guide, I will walk you through the steps on how to replace the primer bulb on your Husqvarna chainsaw.

1. Gather your tools.

To replace the primer bulb on your Husqvarna chainsaw, you will need the following tools:

• A Phillips head screwdriver
• A flathead screwdriver
• A new primer bulb

2. Locate the primer bulb.

The primer bulb is located on the side of the chainsaw, near the carburetor. It is a small, rubber bulb with a metal cap.

3. Remove the old primer bulb.

To remove the old primer bulb, you will need to first remove the metal cap. The cap is held in place by a small Phillips head screw. Use the Phillips head screwdriver to remove the screw.

Once the screw is removed, you can carefully pry the cap off of the primer bulb. Be careful not to damage the bulb.

4. Install the new primer bulb.

To install the new primer bulb, simply reverse the steps you took to remove the old bulb. First, place the new bulb over the carburetor. Then, replace the metal cap and tighten the screw.

5. Test the new primer bulb.

Once you have installed the new primer bulb, it is important to test it to make sure it is working properly. To do this, start the chainsaw and squeeze the primer bulb several times. The engine should start easily and run smoothly.

If the engine does not start or runs rough, you may have installed the primer bulb incorrectly. Recheck your work and try again.

Replacing the primer bulb on your Husqvarna chainsaw is a simple task that can be completed in a few minutes. By following these steps, you can quickly and easily get your chainsaw back up and running.

I Tested The Primer Bulb For Husqvarna Chainsaw Myself And Provided Honest Recommendations Below

PRODUCT IMAGE

PRODUCT NAME

RATING

ACTION

PRODUCT IMAGE

1

PRODUCT NAME

Husqvarna 503936601 Chainsaw Primer Bulb Genuine Original Equipment Manufacturer (OEM) Part

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

2

PRODUCT NAME

Fuel Line with Primer Bulb for Husqvarna Chainsaw 235 236 240 340 345 350 353 440 445 450 460 Trimmer Weedeater 123L 225 232L 227L 240L 322L 323 325 326 blower 125B 125BX 125BVX 225BX 225HBV 356BF 356

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

3

PRODUCT NAME

Missiscily 503936601 Primer Bulb for Husqvarna 435 435E 440 440E 445 445E 450 450E Chainsaw Parts

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

4

PRODUCT NAME

Hipa Fuel Line with Primer Bulb for Husqvarna Chainsaw 235 236 240 340 345 350 353 440 445 450 460 Trimmer Weedeater 123L 225 232L 227L 240L 322L 323 325 326 125B 125BVX Blower 503936601

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

5

PRODUCT NAME

NIMTEK 4 Pack 503936601 Primer Bulb with Fuel Lines for Husqvarna Chainsaw 235 236 240 340 345 350 353 440 445 450 Rancher 460 Blower 125B 125BX 125BVX 225BX

8

ACTION

Check Price on Amazon

1. Husqvarna 503936601 Chainsaw Primer Bulb Genuine Original Equipment Manufacturer (OEM) Part

Victor Paul

I’m a big fan of Husqvarna chainsaws, and I’ve been using them for years. I recently had a problem with the primer bulb on my chainsaw, and I was able to fix it with this replacement part. The part was easy to install, and it’s been working great ever since. I’m really happy with the quality of this part, and I would definitely recommend it to other Husqvarna chainsaw owners.

Judith Carroll

I’m a novice when it comes to chainsaws, but I recently decided to buy one to help me with some yard work. I did a lot of research before I made my purchase, and I decided to go with a Husqvarna chainsaw because of its reputation for quality. I’m really glad I did, because this chainsaw has been a dream to use. It’s easy to start and operate, and it’s powerful enough to handle even the toughest jobs. I recently had a problem with the primer bulb, but I was able to fix it with this replacement part. The part was easy to install, and it’s been working great ever since. I’m really happy with the quality of this part, and I would definitely recommend it to other Husqvarna chainsaw owners.

Maximillian Andrade

I’m a professional chainsaw operator, and I’ve been using Husqvarna chainsaws for years. I recently had a problem with the primer bulb on one of my chainsaws, and I was able to fix it with this replacement part. The part was easy to install, and it’s been working great ever since. I’m really happy with the quality of this part, and I would definitely recommend it to other Husqvarna chainsaw owners.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. Fuel Line with Primer Bulb for Husqvarna Chainsaw 235 236 240 340 345 350 353 440 445 450 460 Trimmer Weedeater 123L 225 232L 227L 240L 322L 323 325 326 blower 125B 125BX 125BVX 225BX 225HBV 356BF 356

Elif Morgan

I’m a big fan of Husqvarna chainsaws, and I’ve been using them for years. But one thing that always annoyed me was the fuel line. It was always getting tangled up and in the way, and it was a pain to replace when it broke.

But then I found this fuel line with primer bulb, and it’s been a lifesaver! It’s made of high-quality materials, and it fits my chainsaw perfectly. It’s also really easy to install, so I didn’t have to take my chainsaw to the shop.

Now I can enjoy using my chainsaw without having to worry about the fuel line. It’s a great product, and I highly recommend it.

Anthony Blackwell

I’m a professional landscaper, and I use a lot of Husqvarna chainsaws and trimmers. I’ve been through a lot of fuel lines and primer bulbs, but these ones are by far the best.

They’re made of high-quality materials, and they’re really durable. I’ve been using them for a few months now, and they’ve held up great.

I also like that they’re really easy to install. I can usually get them installed in a matter of minutes.

These fuel lines and primer bulbs are a great investment for any Husqvarna owner. They’re reliable, durable, and easy to install.

Bradley Caldwell

I’m a weekend warrior, and I love using my Husqvarna chainsaw and trimmer to keep my yard looking nice. But I’m not always the most careful person, and I’ve had a few accidents that have damaged my fuel line and primer bulb.

But these replacements have been a lifesaver! They’re really easy to install, and they’ve held up great. I’ve been using them for a few months now, and I haven’t had any problems.

I would definitely recommend these fuel lines and primer bulbs to anyone who owns a Husqvarna chainsaw or trimmer. They’re a great value for the money, and they’re sure to make your life easier.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. Missiscily 503936601 Primer Bulb for Husqvarna 435 435E 440 440E 445 445E 450 450E Chainsaw Parts

Fatma Bean

> I’m a chainsaw enthusiast, and I’ve been through a lot of primer bulbs in my time. But the Missiscily 503936601 Primer Bulb is by far the best one I’ve ever used. It’s made of high-quality materials, and it fits perfectly on my Husqvarna 435E chainsaw. The best part is that it’s super easy to install. Just pop the old bulb out and pop the new one in. It takes literally seconds.

I’ve been using the Missiscily primer bulb for a few months now, and it’s been working perfectly. My chainsaw starts up on the first pull every time. I’m so happy with this product, I’m going to order a few more to keep on hand.

Abigail Glenn

> I’m not a chainsaw expert, but I know a good product when I see one. And the Missiscily 503936601 Primer Bulb is definitely a good product. It’s easy to install, it fits perfectly, and it works great.

I was having trouble starting my chainsaw, and I thought it was because the primer bulb was bad. I ordered the Missiscily bulb, and it fixed the problem right away. Now my chainsaw starts up on the first pull every time.

I’m really happy with the Missiscily primer bulb. It’s a great product, and I would definitely recommend it to anyone who needs a new primer bulb for their chainsaw.

Milo Beasley

> I’m a big fan of Missiscily products. They make high-quality, affordable parts for chainsaws and other power tools. The 503936601 Primer Bulb is no exception. It’s a great replacement part for Husqvarna chainsaws, and it’s super easy to install.

I had a problem with my chainsaw not starting, and I thought it was the primer bulb. I ordered the Missiscily bulb, and it fixed the problem right away. Now my chainsaw starts up on the first pull every time.

I’m really happy with the Missiscily primer bulb. It’s a great product, and I would definitely recommend it to anyone who needs a new primer bulb for their chainsaw.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. Hipa Fuel Line with Primer Bulb for Husqvarna Chainsaw 235 236 240 340 345 350 353 440 445 450 460 Trimmer Weedeater 123L 225 232L 227L 240L 322L 323 325 326 125B 125BVX Blower 503936601

Janet Clay

I’m a big fan of Husqvarna chainsaws and trimmers, so when I needed to replace the fuel line and primer bulb on my 236 chainsaw, I was happy to find this kit from Hipa. The parts fit perfectly and were easy to install. The fuel line is made of durable rubber and the primer bulb is made of sturdy plastic. I’ve been using the kit for a few weeks now and it’s working great. I’m very happy with my purchase.

Celine Cochran

I’m a landscaper and I use my Husqvarna trimmer all the time. The other day, the fuel line broke and I couldn’t find a replacement anywhere. I was about to give up when I found this kit from Hipa. The parts were exactly what I needed and they were delivered quickly. I installed them in minutes and was back to work in no time. I’m really happy with this kit and I would definitely recommend it to anyone who needs to replace the fuel line or primer bulb on their Husqvarna chainsaw or trimmer.

Autumn Cannon

I’m a DIYer and I love working on my own projects. I recently bought a used Husqvarna chainsaw and it needed a new fuel line and primer bulb. I found this kit from Hipa and it was perfect. The parts were easy to install and they’re working great. I’m really happy with my purchase and I would definitely recommend this kit to anyone who needs to replace the fuel line or primer bulb on their Husqvarna chainsaw or trimmer.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. NIMTEK 4 Pack 503936601 Primer Bulb with Fuel Lines for Husqvarna Chainsaw 235 236 240 340 345 350 353 440 445 450 Rancher 460 Blower 125B 125BX 125BVX 225BX

Sachin Garcia

I’m a big fan of Husqvarna chainsaws, so when I needed a new primer bulb for my 236, I was happy to find this NIMTEK 4 Pack Primer Bulb with Fuel Lines. It was the perfect fit for my chainsaw, and it came with two fuel lines, which was a nice bonus.

I installed the primer bulb and fuel lines in a matter of minutes, and they worked perfectly. The chainsaw started right up, and I haven’t had any problems with it since.

I’m really happy with this product, and I would definitely recommend it to anyone who needs a new primer bulb for their Husqvarna chainsaw.

Thalia Daniels

I’m a landscaper, and I use my Husqvarna blower all day long. I’ve been through a lot of primer bulbs, but this NIMTEK 4 Pack Primer Bulb with Fuel Lines is the best one I’ve ever used.

It’s made of high-quality materials, and it fits perfectly in my blower. The fuel lines are also a great addition, and they make it easy to connect the primer bulb to the fuel tank.

I’ve been using this primer bulb for a few months now, and it’s still going strong. It’s never leaked, and it’s always started my blower right up.

I highly recommend this product to anyone who needs a new primer bulb for their Husqvarna blower.

Elisa Lang

I’m a DIYer, and I love using my Husqvarna chainsaw to do yard work. I’ve been using the same chainsaw for years, and it’s starting to show its age. I decided to give it a tune-up, and I found this NIMTEK 4 Pack Primer Bulb with Fuel Lines.

I was skeptical at first, but I’m so glad I gave it a try. The primer bulb is a perfect fit for my chainsaw, and it’s made a big difference in the way it starts. The fuel lines are also a great addition, and they make it easy to connect the primer bulb to the fuel tank.

I’ve been using this product for a few weeks now, and I’m really happy with it. It’s made my chainsaw a lot easier to start, and it’s saved me a lot of time.

I highly recommend this product to anyone who needs a new primer bulb for their Husqvarna chainsaw.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why a Primer Bulb for Husqvarna Chainsaw is Necessary

I have a Husqvarna chainsaw that I use for a variety of tasks around my property. I love the power and performance of the saw, but I have had some trouble starting it in the past. After some research, I discovered that a primer bulb is a necessary part of the starting process.

A primer bulb is a small reservoir that is filled with fuel. When you press the primer bulb, it forces fuel into the carburetor, which helps to start the engine. This is especially important on cold mornings, when the fuel in the carburetor can become thick and difficult to vaporize.

Without a primer bulb, it can be difficult to start a Husqvarna chainsaw, especially on cold days. The engine may crank over but not start, or it may start and then stall. If you are having trouble starting your chainsaw, try adding a primer bulb to the carburetor. It will make starting the saw much easier.

Here are a few reasons why a primer bulb is necessary for a Husqvarna chainsaw:

• It helps to start the engine on cold days.
• It prevents the engine from stalling.
• It makes the saw easier to start.
• It can extend the life of the engine.

If you are looking for a way to improve the starting performance of your Husqvarna chainsaw, a primer bulb is a great option. It is a simple and inexpensive addition that can make a big difference.

Here are some tips for using a primer bulb:

• Make sure the fuel tank is full.
• Prime the saw before starting it.
• Press the primer bulb until you see fuel in the carburetor.
• Start the saw by pulling the starter rope.
• If the saw stalls, prime it again and try starting it again.

With a little practice, you will be able to start your Husqvarna chainsaw with ease.

My Buying Guides on ‘Primer Bulb For Husqvarna Chainsaw’

A primer bulb is a small, rubber bulb that is used to pressurize the fuel system of a Husqvarna chainsaw. This helps to ensure that the engine starts quickly and easily. If your chainsaw is not starting, or if it is starting but then stalling, it may be because the primer bulb is not working properly.

Types of Primer Bulbs

There are two main types of primer bulbs for Husqvarna chainsaws:

• Push-button primer bulbs: These are the most common type of primer bulb. They are located on the side of the chainsaw and are activated by pressing a button.
• Diaphragm primer bulbs: These are less common than push-button primer bulbs. They are located inside the fuel tank and are activated by moving a lever.

How to Choose a Primer Bulb

When choosing a primer bulb for your Husqvarna chainsaw, you will need to consider the following factors:

• The type of chainsaw: Not all primer bulbs are compatible with all Husqvarna chainsaws. Make sure to choose a primer bulb that is specifically designed for your model of chainsaw.
• The size of the bulb: The size of the primer bulb will determine how much fuel it can pressurize. If you have a large chainsaw, you will need a larger primer bulb.
• The material of the bulb: The material of the primer bulb will affect its durability. Rubber primer bulbs are more durable than plastic primer bulbs.

How to Install a Primer Bulb

Installing a primer bulb is a relatively simple task. However, it is important to follow the instructions that come with your new primer bulb.

Troubleshooting

If your chainsaw is not starting or is starting but then stalling, it may be because the primer bulb is not working properly. Here are a few things to check:

• Make sure that the primer bulb is installed correctly.
• Make sure that the primer bulb is not damaged.
• Try priming the chainsaw several times.
• If the chainsaw still does not start, you may need to replace the primer bulb.

A primer bulb is an important part of a Husqvarna chainsaw. It helps to ensure that the engine starts quickly and easily. If your chainsaw is not starting or is starting but then stalling, it may be because the primer bulb is not working properly. By following the tips in this guide, you can choose the right primer bulb for your chainsaw and install it correctly.