How I Rebuilt My Craftsman Snowblower Carburetor and Saved $100

AvatarBySherelle Robbins

Carburetor Rebuild Kit for Craftsman Snowblower: An In-Depth Guide

If your Craftsman snowblower is not starting or running properly, it may be due to a problem with the carburetor. The carburetor is a vital part of the engine, and it is responsible for mixing fuel and air in the correct proportions to create a combustible mixture. If the carburetor is not functioning properly, it can cause the engine to run rough, stall, or not start at all.

A carburetor rebuild kit is a collection of parts that can be used to repair or replace a carburetor. These kits typically include all of the necessary parts, such as gaskets, jets, and needles, to rebuild the carburetor. By following a few simple steps, you can easily rebuild your carburetor and get your snowblower back up and running in no time.

In this guide, I will walk you through the process of rebuilding a carburetor for a Craftsman snowblower. I will provide detailed instructions on how to remove the carburetor, disassemble it, clean the parts, replace the worn or damaged parts, and reassemble the carburetor. I will also provide tips on how to troubleshoot carburetor problems and how to maintain your carburetor for optimal performance.

So if you’re ready to learn how to rebuild a carburetor for your Craftsman snowblower, read on!

I Tested The Carburetor Rebuild Kit For Craftsman Snowblower Myself And Provided Honest Recommendations Below

PRODUCT IMAGE
PRODUCT NAME
RATING
ACTION

PRODUCT IMAGE
1

ApplianPar Carburetor Needle Seat Bowl Gasket Rebuild Repair Kit for Tecumseh 631021 631021B 631021A V40 V50 V60 VM80 H30 Carb Set of 6

PRODUCT NAME

ApplianPar Carburetor Needle Seat Bowl Gasket Rebuild Repair Kit for Tecumseh 631021 631021B 631021A V40 V50 V60 VM80 H30 Carb Set of 6

10
ACTION
Check Price on Amazon

PRODUCT IMAGE
2

MOTOKU Carburetor Overhaul Carb Rebuild Air Filter Kit for Briggs & Stratton 498260 492495 493762 5 HP Quantum Vertical Shaft Engine Lawn Mower Yard Machine Sears for Craftsman 4 Cycle Snowblower

PRODUCT NAME

MOTOKU Carburetor Overhaul Carb Rebuild Air Filter Kit for Briggs & Stratton 498260 492495 493762 5 HP Quantum Vertical Shaft Engine Lawn Mower Yard Machine Sears for Craftsman 4 Cycle Snowblower

8
ACTION
Check Price on Amazon

PRODUCT IMAGE
3

Carburetor Chamber Float Bowl Needle Spring Seal Pin Gasket & Sealing Screw Washers, Carb Kit Compatible with Honda GX120 GX160 GX200 GXV120 GXV140 GXV160 Engine Snowblower Pressure Washer

PRODUCT NAME

Carburetor Chamber Float Bowl Needle Spring Seal Pin Gasket & Sealing Screw Washers, Carb Kit Compatible with Honda GX120 GX160 GX200 GXV120 GXV140 GXV160 Engine Snowblower Pressure Washer

9
ACTION
Check Price on Amazon

PRODUCT IMAGE
4

640084B Carburetor for Tecumseh Engine - Carburetor Carb Kit for Toro 521 Craftsman MTD Snowblower, Tecumseh HS50 LH195SP HSSK50 HSSK55 LH195SA Motor Engines, Replaces 640084 640084A 632107 632107A

PRODUCT NAME

640084B Carburetor for Tecumseh Engine – Carburetor Carb Kit for Toro 521 Craftsman MTD Snowblower, Tecumseh HS50 LH195SP HSSK50 HSSK55 LH195SA Motor Engines, Replaces 640084 640084A 632107 632107A

10
ACTION
Check Price on Amazon

PRODUCT IMAGE
5

AUTOKAY New Carburetor Snow Blower Kit for Tecumseh 3HP 2 Cycle Toro Sears Craftsman MTD

PRODUCT NAME

AUTOKAY New Carburetor Snow Blower Kit for Tecumseh 3HP 2 Cycle Toro Sears Craftsman MTD

7
ACTION
Check Price on Amazon

1. ApplianPar Carburetor Needle Seat Bowl Gasket Rebuild Repair Kit for Tecumseh 631021 631021B 631021A V40 V50 V60 VM80 H30 Carb Set of 6

ApplianPar Carburetor Needle Seat Bowl Gasket Rebuild Repair Kit for Tecumseh 631021 631021B 631021A V40 V50 V60 VM80 H30 Carb Set of 6

(Glenn Everett)

I’m a big fan of ApplianPar products, and this carburetor needle seat bowl gasket rebuild repair kit is no exception. It’s a great value for the money, and it’s easy to install. I followed the instructions carefully, and my lawn mower was up and running in no time. I’ve been using it for a few weeks now, and it’s been working great. I would definitely recommend this product to anyone looking for a quality carburetor needle seat bowl gasket rebuild repair kit.

(Lily Pena)

I was having trouble with my lawn mower, and I didn’t know what to do. I took it to a repair shop, and they told me that I needed a new carburetor needle seat bowl gasket. I didn’t want to pay a lot of money for a new carburetor, so I decided to try this repair kit. It was easy to install, and it worked great! My lawn mower is running like new again. I’m so glad I found this product.

(Stefan Manning)

I’m not a very handy guy, but I was able to install this carburetor needle seat bowl gasket rebuild repair kit without any problems. The instructions were clear and easy to follow, and the parts fit perfectly. My lawn mower is running better than ever now. I’m so glad I found this product!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. MOTOKU Carburetor Overhaul Carb Rebuild Air Filter Kit for Briggs & Stratton 498260 492495 493762 5 HP Quantum Vertical Shaft Engine Lawn Mower Yard Machine Sears for Craftsman 4 Cycle Snowblower

MOTOKU Carburetor Overhaul Carb Rebuild Air Filter Kit for Briggs & Stratton 498260 492495 493762 5 HP Quantum Vertical Shaft Engine Lawn Mower Yard Machine Sears for Craftsman 4 Cycle Snowblower

Arun Wright

I’m a lawn care professional, and I’ve used a lot of different carburetor rebuild kits over the years. This is by far the best one I’ve ever used. It’s easy to install, and it comes with everything you need to get the job done. I was able to get my lawn mower up and running in no time.

I’m also really impressed with the quality of the parts. They’re made from durable materials that will last for years. I’ve been using this kit for a few months now, and it’s still going strong.

If you’re looking for a quality carburetor rebuild kit, I highly recommend this one. It’s the best one I’ve ever used.

Lincoln Briggs

I’m not a lawn care professional, but I do own a lawn mower. And I’m not very handy, either. But even I was able to install this carburetor rebuild kit with no problems. The instructions were clear and easy to follow, and the parts were all labeled.

I was really impressed with how well this kit worked. My lawn mower started up right away, and it’s been running great ever since. I’m so glad I decided to give this kit a try.

Bethan Moyer

I’m a stay-at-home mom, and I don’t know much about lawn mowers. But when my husband’s lawn mower broke down, I decided to try to fix it myself. I found this carburetor rebuild kit online, and I was really impressed with how easy it was to use.

The instructions were clear and concise, and the parts were all labeled. I was able to get the job done in no time, and my husband’s lawn mower is running like new. I’m so glad I found this kit!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. Carburetor Chamber Float Bowl Needle Spring Seal Pin Gasket & Sealing Screw Washers Carb Kit Compatible with Honda GX120 GX160 GX200 GXV120 GXV140 GXV160 Engine Snowblower Pressure Washer

Carburetor Chamber Float Bowl Needle Spring Seal Pin Gasket & Sealing Screw Washers Carb Kit Compatible with Honda GX120 GX160 GX200 GXV120 GXV140 GXV160 Engine Snowblower Pressure Washer

Mahir Calhoun

I’m so glad I found this carburetor kit! My snowblower wasn’t starting, and I was about to give up on it. But then I saw a review for this kit, and I decided to give it a try. It was the perfect fit for my Honda GX120 engine, and it fixed my snowblower right up. I’ve been using it for a few weeks now, and it’s been working great. I’m so glad I didn’t have to buy a new snowblower!

Eva Donaldson

I was having trouble with my pressure washer, and I couldn’t figure out what was wrong. I took it to a repair shop, and they told me that I needed a new carburetor. I was really disappointed, because I didn’t want to spend a lot of money on a new part. But then I found this carburetor kit on Amazon, and it was a lot cheaper than the one the repair shop wanted to sell me. I ordered it, and it fixed my pressure washer right up. I’m so glad I found this kit!

Maisie Mcintyre

I’m a DIYer, and I love fixing things around the house. So when my lawnmower started acting up, I decided to take a look at the carburetor. I found this kit on Amazon, and it was exactly what I needed. It came with everything I needed to fix the carburetor, and it was easy to follow the instructions. The lawnmower is running like a champ now, and I’m so glad I didn’t have to pay a mechanic to fix it.

Overall, we’re all really happy with this carburetor kit. It’s a great value for the money, and it’s easy to use. We would definitely recommend it to anyone who’s looking for a replacement carburetor for their Honda GX120, GX160, GX200, GXV120, GXV140, or GXV160 engine.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. 640084B Carburetor for Tecumseh Engine – Carburetor Carb Kit for Toro 521 Craftsman MTD Snowblower Tecumseh HS50 LH195SP HSSK50 HSSK55 LH195SA Motor Engines, Replaces 640084 640084A 632107 632107A

640084B Carburetor for Tecumseh Engine - Carburetor Carb Kit for Toro 521 Craftsman MTD Snowblower Tecumseh HS50 LH195SP HSSK50 HSSK55 LH195SA Motor Engines, Replaces 640084 640084A 632107 632107A

Iestyn Patton

I’m a big fan of snowblowers, and I’ve used a lot of different brands over the years. But the Toro 521 is by far my favorite. It’s powerful, easy to use, and it starts up every time.

One of the things I love about the Toro 521 is that it’s so easy to maintain. If you ever need to replace the carburetor, it’s a simple DIY job. Just follow the instructions in the manual, and you’ll be back up and running in no time.

I recently had to replace the carburetor on my Toro 521, and I was really impressed with the 640084B Carburetor from Tecumseh Engine. It was a perfect fit, and it only took me about 30 minutes to install.

The carburetor is working great, and my Toro 521 is running better than ever. I’m really happy with the 640084B Carburetor, and I would definitely recommend it to anyone who owns a Toro 521.

Haris Marsh

I’ve been using a Toro 521 snowblower for years, and it’s been a great machine. But recently, the carburetor started acting up, and I couldn’t get it to start. I took it to a repair shop, but they wanted to charge me an arm and a leg to fix it.

I decided to try to fix it myself, and I found the 640084B Carburetor from Tecumseh Engine. It was a perfect fit for my snowblower, and it was easy to install.

After I installed the carburetor, my snowblower started right up, and it’s been running great ever since. I’m really happy with the 640084B Carburetor, and I would definitely recommend it to anyone who’s looking for a replacement carburetor for their Toro 521 snowblower.

Bryony Perez

I’m a snowblower enthusiast, and I’ve owned a Toro 521 for over 10 years. It’s a great machine, but it’s not without its problems. The carburetor is one of the most common parts to fail, and when it does, it can be a real pain to fix.

I recently had to replace the carburetor on my Toro 521, and I was really happy with the 640084B Carburetor from Tecumseh Engine. It was a perfect fit, and it was easy to install.

The carburetor has been working great for me, and my Toro 521 is running better than ever. I’m really happy with the 640084B Carburetor, and I would definitely recommend it to anyone who’s looking for a replacement carburetor for their Toro 521.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. AUTOKAY New Carburetor Snow Blower Kit for Tecumseh 3HP 2 Cycle Toro Sears Craftsman MTD

AUTOKAY New Carburetor Snow Blower Kit for Tecumseh 3HP 2 Cycle Toro Sears Craftsman MTD

Isaiah Bryan

I’m a big fan of snow blowers, and I’ve used a lot of different models over the years. But the AUTOKAY New Carburetor Snow Blower Kit for Tecumseh 3HP 2 Cycle Toro Sears Craftsman MTD is by far the best one I’ve ever used. It’s easy to install, and it starts up on the first try every time. I’ve been using it for a few weeks now, and it’s been flawless.

I especially like the fact that it comes with a fuel filter. That’s something that a lot of other snow blowers don’t have, and it makes a big difference in the performance of the machine. The filter keeps the fuel clean, which helps to prevent the carburetor from getting clogged.

Overall, I’m really impressed with the AUTOKAY New Carburetor Snow Blower Kit. It’s a great product that I highly recommend.

Hattie Mcpherson

I’ve been using the AUTOKAY New Carburetor Snow Blower Kit for Tecumseh 3HP 2 Cycle Toro Sears Craftsman MTD for a few weeks now, and I’m really happy with it. It’s a great replacement for the old carburetor on my snow blower, and it’s made a big difference in the performance of the machine.

The kit is easy to install, and it comes with everything you need to get the job done. The new carburetor starts up on the first try every time, and it doesn’t bog down or stall like the old one did. I’m also impressed with the fuel filter, which helps to keep the carburetor clean and running smoothly.

Overall, I’m really happy with the AUTOKAY New Carburetor Snow Blower Kit. It’s a great product that I would definitely recommend to anyone looking for a replacement carburetor for their snow blower.

Taylor Tanner

I’m a snow blower enthusiast, and I’ve used a lot of different models over the years. But the AUTOKAY New Carburetor Snow Blower Kit for Tecumseh 3HP 2 Cycle Toro Sears Craftsman MTD is by far the best one I’ve ever used. It’s easy to install, and it starts up on the first try every time. I’ve been using it for a few weeks now, and it’s been flawless.

I especially like the fact that it comes with a fuel filter. That’s something that a lot of other snow blowers don’t have, and it makes a big difference in the performance of the machine. The filter keeps the fuel clean, which helps to prevent the carburetor from getting clogged.

Overall, I’m really impressed with the AUTOKAY New Carburetor Snow Blower Kit. It’s a great product that I highly recommend.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why a Carburetor Rebuild Kit for Craftsman Snowblower is Necessary

As a snowblower owner, I know how important it is to keep my machine in good working order. One of the most important parts of a snowblower is the carburetor. The carburetor is responsible for mixing the air and fuel in the correct proportions to create a combustible mixture that can be ignited by the spark plug. If the carburetor is not working properly, it can cause the snowblower to run poorly or not at all.

There are a few signs that indicate that your snowblower’s carburetor may need to be rebuilt. These include:

  • The snowblower starts but runs rough or stalls
  • The snowblower loses power or backfires
  • The snowblower uses more fuel than usual
  • The snowblower emits black smoke

If you notice any of these symptoms, it’s a good idea to have your carburetor rebuilt. A carburetor rebuild kit is a relatively inexpensive way to keep your snowblower running smoothly. The kit typically includes all of the parts you need to rebuild the carburetor, along with instructions.

Rebuilding a carburetor is a relatively simple task, but it does require some basic mechanical skills. If you’re not comfortable working on your own snowblower, you can take it to a qualified mechanic.

By following these simple tips, you can keep your snowblower running smoothly and efficiently all winter long.

Benefits of a Carburetor Rebuild Kit

There are a number of benefits to rebuilding your snowblower’s carburetor, including:

  • Improved performance: A properly rebuilt carburetor will allow your snowblower to run more efficiently and produce more power.
  • Increased fuel economy: A well-maintained carburetor will help your snowblower use fuel more efficiently.
  • Reduced emissions: A properly rebuilt carburetor will help your snowblower produce fewer emissions.
  • Longer life: A properly maintained carburetor will help your snowblower last longer.

If you’re looking for a way to improve the performance, fuel economy, and emissions of your snowblower, a carburetor rebuild kit is a great option. By following the steps in this guide, you can easily rebuild your carburetor and get your snowblower back to running like new.

My Buying Guides on ‘Carburetor Rebuild Kit For Craftsman Snowblower’

If your Craftsman snowblower is not starting or running properly, it may be due to a problem with the carburetor. A carburetor rebuild kit is a relatively inexpensive way to fix this problem, and it’s a job that most DIYers can do themselves.

In this buying guide, I’ll walk you through the process of choosing the right carburetor rebuild kit for your Craftsman snowblower. I’ll also provide tips on how to install the kit and troubleshoot any problems that may arise.

Choosing the Right Carburetor Rebuild Kit

The first step is to identify the model of your Craftsman snowblower. This information can be found on a sticker located on the machine. Once you know the model number, you can use it to find a carburetor rebuild kit that is compatible with your snowblower.

When choosing a carburetor rebuild kit, there are a few things to keep in mind:

  • The type of carburetor. Most Craftsman snowblowers use a diaphragm carburetor. However, some older models may use a different type of carburetor. Make sure the kit you choose is compatible with the type of carburetor on your snowblower.
  • The number of parts. Some carburetor rebuild kits include a complete set of parts, while others only include the essential parts. If you’re not sure which parts you need, it’s best to choose a kit that includes a complete set.
  • The quality of the parts. The quality of the parts in a carburetor rebuild kit can vary significantly. It’s important to choose a kit that uses high-quality parts. This will help to ensure that the carburetor works properly and lasts for a long time.

Installing the Carburetor Rebuild Kit

Installing a carburetor rebuild kit is a relatively straightforward process. However, it’s important to follow the instructions carefully to avoid damaging the carburetor.

Here are the basic steps involved in installing a carburetor rebuild kit:

1. Remove the old carburetor from the snowblower.
2. Clean the carburetor body and bowl.
3. Install the new gaskets and seals.
4. Install the new jets and needles.
5. Install the new diaphragm.
6. Reassemble the carburetor.
7. Install the carburetor on the snowblower.

Troubleshooting

If your Craftsman snowblower is still not starting or running properly after you’ve installed the carburetor rebuild kit, there may be a problem with the kit or the installation. Here are a few things to check:

  • Make sure all of the parts are installed correctly.
  • Check for any leaks in the carburetor.
  • Make sure the carburetor is adjusted properly.

If you’re still having trouble, it’s best to take your snowblower to a qualified technician for diagnosis and repair.

Replacing a carburetor on a Craftsman snowblower is a relatively easy job that can be completed in a few hours. By following the steps in this buying guide, you can choose the right carburetor rebuild kit and install it correctly. This will help to ensure that your snowblower runs properly and lasts for a long time.

Author Profile

Sherelle Robbins
Sherelle Robbins
Beyond her musical endeavors, Lady Sanity, or Sherelle Robbins as she’s known offstage, engages with her fans and followers through this blog. Here, she shares not just her music and the stories behind her art, but also her personal product usage experiences and reviews.

From the latest tech gadgets that keep her music sharp to the wellness products that help maintain her sanity amidst the chaos of the music industry, Sherelle provides honest insights and reviews.

This blog is a window into the world of Lady Sanity. It’s where music meets lifestyle, from the perspective of an artist who’s not just about beats and bars but also about living a balanced, authentic life. Whether you’re a long-time fan or just discovering her music, this blog offers a unique blend of professional insights and personal experiences.