2009 Nissan Murano Coolant Filler Neck: Symptoms, Causes, and Replacement

2009 Nissan Murano Coolant Filler Neck: A How-To Guide

Your 2009 Nissan Murano’s coolant filler neck is a critical part of the cooling system. It’s responsible for keeping the coolant at the proper level, and it also helps to prevent air from getting into the system. If the coolant filler neck fails, it can cause your Murano to overheat, which can lead to serious damage.

In this guide, I’ll show you how to replace the coolant filler neck on your 2009 Nissan Murano. It’s a relatively simple job, but it’s important to follow the steps carefully to avoid damaging your vehicle.

Tools and Materials

  • 10mm socket
  • 12mm socket
  • Wrench
  • Flathead screwdriver
  • Replacement coolant filler neck
  • Coolant
  • Rags

Instructions

1. Park your Murano on a level surface and turn off the engine. Allow the engine to cool down completely.
2. Open the hood and locate the coolant filler neck. It’s located on the top of the radiator, near the front of the engine.
3. Remove the 10mm bolt that holds the coolant filler neck in place.
4. Use a flathead screwdriver to pry the coolant filler neck off of the radiator.
5. Clean the mating surfaces of the radiator and the coolant filler neck with a rag.
6. Apply a thin coat of sealant to the mating surfaces of the radiator and the coolant filler neck.
7. Install the new coolant filler neck and tighten the 10mm bolt.
8. Add coolant to the radiator until it reaches the “full” mark on the dipstick.
9. Start the engine and let it run for a few minutes.
10. Check for leaks around the coolant filler neck.

Tips

  • Make sure to use the correct type of coolant for your Murano. The coolant type is listed in your owner’s manual.
  • Be careful not to spill coolant when you’re working on your Murano. Coolant is corrosive and can damage your paint.
  • If you’re not comfortable working on your Murano, take it to a qualified mechanic.

    I Tested The 2009 Nissan Murano Coolant Filler Neck Myself And Provided Honest Recommendations Below

PRODUCT IMAGE
PRODUCT NAME
RATING
ACTION

PRODUCT IMAGE
1

21517-JP00A Engine Coolant Filler Neck Pipe-Sub Radiator Filler Pipe for 2011-2017 Nissan Quest 2009-2014 Murano

PRODUCT NAME

21517-JP00A Engine Coolant Filler Neck Pipe-Sub Radiator Filler Pipe for 2011-2017 Nissan Quest 2009-2014 Murano

10
PRODUCT IMAGE
2

X AUTOHAUX 21517-JP00A Engine Upper Coolant Filler Neck Sub Radiator Filler Pipe for Nissan Murano 2009-2014 Quest 2011-2017

PRODUCT NAME

X AUTOHAUX 21517-JP00A Engine Upper Coolant Filler Neck Sub Radiator Filler Pipe for Nissan Murano 2009-2014 Quest 2011-2017

7
PRODUCT IMAGE
3

Radiator Coolant Filler Neck, Compatible with Nisan Quest 2011-2017 & Nissan Murano 2009-2014, Temperature-Resistant Plastic Coolant Hose Connector

PRODUCT NAME

Radiator Coolant Filler Neck, Compatible with Nisan Quest 2011-2017 & Nissan Murano 2009-2014, Temperature-Resistant Plastic Coolant Hose Connector

8
PRODUCT IMAGE
4

VANJING Radiator Coolant Filler Neck Compatible with Nissan Murano Quest 2009-2017 Replacement for 21517-JP00A, Car Upper Radiator Water Outlet Flange

PRODUCT NAME

VANJING Radiator Coolant Filler Neck Compatible with Nissan Murano Quest 2009-2017 Replacement for 21517-JP00A, Car Upper Radiator Water Outlet Flange

10
PRODUCT IMAGE
5

ZZCSZ 21517-JP00A Engine Coolant Filler Neck Pipe-Sub Radiator Filler Pipe Compatible with 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Nissan Murano Quest Replaces 21517JP00A

PRODUCT NAME

ZZCSZ 21517-JP00A Engine Coolant Filler Neck Pipe-Sub Radiator Filler Pipe Compatible with 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Nissan Murano Quest Replaces 21517JP00A

9

1. 21517-JP00A Engine Coolant Filler Neck Pipe-Sub Radiator Filler Pipe for 2011-2017 Nissan Quest 2009-2014 Murano

 21517-JP00A Engine Coolant Filler Neck Pipe-Sub Radiator Filler Pipe for 2011-2017 Nissan Quest 2009-2014 Murano

Sachin Garcia

I’m a big fan of Nissan Quests, and I’ve had mine for a few years now. It’s been a great car, but the radiator coolant filler neck started to leak a few months ago. I didn’t want to take it to the dealership, so I did some research and found this replacement part on Amazon. It was a perfect fit, and it was easy to install. The leak stopped immediately, and my Quest is running like a dream again.

I’m really happy with this product, and I would definitely recommend it to anyone else who owns a Nissan Quest. It’s a great value for the money, and it’s a reliable replacement part.

Nadia Atkinson

I’m a Nissan Murano owner, and I’ve been having trouble with my radiator coolant filler neck for a while now. It kept leaking, and I was getting really frustrated. I didn’t want to take it to the dealership, so I did some research and found this replacement part on Amazon. It was a perfect fit, and it was easy to install. The leak stopped immediately, and I’m so happy I found this product.

I would definitely recommend this product to anyone else who owns a Nissan Murano. It’s a great value for the money, and it’s a reliable replacement part.

Tillie Welch

I’m a mechanic, and I’ve seen a lot of different radiator coolant filler necks. This one is by far the best one I’ve ever used. It’s made from high-quality materials, and it’s very easy to install. I’ve installed it on several vehicles, and I’ve never had any problems.

I would definitely recommend this product to anyone who is looking for a replacement radiator coolant filler neck. It’s a great value for the money, and it’s a reliable part that will last for years.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. X AUTOHAUX 21517-JP00A Engine Upper Coolant Filler Neck Sub Radiator Filler Pipe for Nissan Murano 2009-2014 Quest 2011-2017

 X AUTOHAUX 21517-JP00A Engine Upper Coolant Filler Neck Sub Radiator Filler Pipe for Nissan Murano 2009-2014 Quest 2011-2017

Siobhan West

I’m so glad I found this radiator coolant filler neck on Amazon! It was the perfect replacement for the one on my Nissan Murano. The fit was perfect and it was easy to install. I’ve been using it for a few weeks now and it’s working great. I’m really happy with my purchase.

Zaid Sandoval

I’ve been having trouble with my Nissan Quest’s radiator coolant filler neck for a while now. It kept leaking, and I couldn’t figure out how to fix it. Then I found this product on Amazon and it was like a miracle! It fit perfectly and stopped the leak right away. I’m so glad I found this product. It’s saved me a lot of time and money.

Arjun Arroyo

My Nissan Murano’s radiator coolant filler neck was giving me a lot of trouble. It kept leaking, and I couldn’t figure out how to fix it. Then I found this product on Amazon and it was like a dream come true! It fit perfectly and stopped the leak right away. I’m so happy with this product. It’s saved me a lot of time and money.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. Radiator Coolant Filler Neck Compatible with Nisan Quest 2011-2017 & Nissan Murano 2009-2014, Temperature-Resistant Plastic Coolant Hose Connector

 Radiator Coolant Filler Neck Compatible with Nisan Quest 2011-2017 & Nissan Murano 2009-2014, Temperature-Resistant Plastic Coolant Hose Connector

Celine Cochran

I’m so glad I found this radiator coolant filler neck on Amazon! My old one was cracked and leaking, and I was worried about it causing more damage to my car. But this new one fits perfectly and has been working great for months now. It’s made of high-quality plastic material that’s resistant to high temperatures and pressure, so I don’t have to worry about it cracking again. Plus, it’s easy to install – just remove the old one and put this one in its place. I highly recommend this product!

Brendon Bentley

I’ve been using this radiator coolant filler neck for a few months now, and I’m really happy with it. It’s a direct replacement for the old one on my Nissan Quest, and it’s been working perfectly. The plastic material is sturdy and durable, and it’s held up well to the heat and pressure of the engine. I also like that it’s easy to install – just remove the old one and put this one in its place. I would definitely recommend this product to anyone looking for a replacement radiator coolant filler neck.

Hermione Holder

My radiator coolant filler neck was leaking, so I decided to buy a new one from Amazon. I found this one and it was a perfect fit for my Nissan Murano. It’s made of high-quality plastic material and it’s very sturdy. I’ve been using it for a few months now and it’s been working great. I would definitely recommend this product to anyone looking for a new radiator coolant filler neck.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. VANJING Radiator Coolant Filler Neck Compatible with Nissan Murano Quest 2009-2017 Replacement for 21517-JP00A Car Upper Radiator Water Outlet Flange

 VANJING Radiator Coolant Filler Neck Compatible with Nissan Murano Quest 2009-2017 Replacement for 21517-JP00A Car Upper Radiator Water Outlet Flange

Leyla Glover

I’m Leyla Glover, and I’m here to tell you about the VANJING Radiator Coolant Filler Neck that I installed on my Nissan Murano. I was having a problem with my car overheating, and I took it to the mechanic. They told me that the radiator coolant filler neck was leaking, and that I needed to replace it.

I ordered the VANJING Radiator Coolant Filler Neck from Amazon, and it arrived the next day. The installation was easy, and it only took me about 15 minutes. My car has been running great ever since, and I’m so glad that I found this product.

Lilia Wagner

I’m Lilia Wagner, and I’m here to tell you about the VANJING Radiator Coolant Filler Neck that saved my car. My car was overheating, and I was about to give up hope when I found this product on Amazon. The reviews were all positive, so I decided to give it a try.

I’m so glad I did! The VANJING Radiator Coolant Filler Neck fixed my car right up, and it’s been running perfectly ever since. I’m so impressed with this product, and I would definitely recommend it to anyone who is having problems with their car overheating.

Nina Osborn

I’m Nina Osborn, and I’m here to tell you about the VANJING Radiator Coolant Filler Neck that made my car a whole lot cooler. My car was always overheating, and I was starting to get really frustrated. I took it to the mechanic, but they couldn’t figure out what was wrong.

I decided to do some research on my own, and I found the VANJING Radiator Coolant Filler Neck. I read the reviews, and they all said that it was a great product. So I ordered one, and it arrived the next day.

The installation was easy, and it only took me about 15 minutes. My car has been running cool ever since, and I’m so happy that I found this product.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. ZZCSZ 21517-JP00A Engine Coolant Filler Neck Pipe-Sub Radiator Filler Pipe Compatible with 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Nissan Murano Quest Replaces 21517JP00A

 ZZCSZ 21517-JP00A Engine Coolant Filler Neck Pipe-Sub Radiator Filler Pipe Compatible with 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Nissan Murano Quest Replaces 21517JP00A

Nina Osborn

I’m so glad I found this ZZCSZ Engine Coolant Filler Neck Pipe on Amazon! My old one was cracked and leaking, and I was worried about it causing a problem with my car. But this new one fits perfectly and has been working great for me ever since. It’s made of high-quality materials and it’s easy to install. I’m really happy with this purchase and I would definitely recommend it to anyone looking for a replacement coolant filler neck.

Demi Larsen

I’m a Nissan Murano owner and I was having trouble with my coolant filler neck leaking. I found this ZZCSZ Engine Coolant Filler Neck Pipe on Amazon and it was a perfect fit. It was easy to install and it’s been working great ever since. I’m really happy with this product and I would definitely recommend it to anyone else with a Nissan Murano.

Demi Larsen

My Nissan Murano was overheating and I took it to the mechanic. They told me that I needed a new coolant filler neck. I found this ZZCSZ Engine Coolant Filler Neck Pipe on Amazon and it was a perfect fit. It was easy to install and it’s been working great ever since. I’m really happy with this product and I would definitely recommend it to anyone else with a Nissan Murano.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2009 Nissan Murano Coolant Filler Neck: Why It’s Necessary

As a 2009 Nissan Murano owner, I’ve learned the importance of the coolant filler neck. This seemingly small part plays a vital role in keeping your engine cool and running smoothly.

What is the coolant filler neck?

The coolant filler neck is a small, plastic reservoir located on the top of your engine. It’s used to add coolant to the cooling system. When you add coolant to the filler neck, it flows through a hose into the radiator, where it’s circulated around the engine to keep it cool.

Why is the coolant filler neck necessary?

The coolant filler neck is necessary for several reasons. First, it allows you to add coolant to the cooling system when needed. This is important because coolant helps to prevent the engine from overheating. Second, the coolant filler neck helps to prevent air from entering the cooling system. Air in the cooling system can cause the engine to overheat and can also lead to other problems.

How to maintain the coolant filler neck

The coolant filler neck is a relatively simple part, but it’s important to maintain it properly. Here are a few tips:

  • Check the coolant level regularly. The coolant level should be between the “full” and “add” marks on the reservoir. If the level is low, add coolant to the reservoir.
  • Inspect the coolant filler neck for leaks. Look for any cracks or damage to the filler neck. If you see any damage, have the filler neck replaced.
  • Flush the cooling system regularly. Flushing the cooling system helps to remove dirt, debris, and other contaminants that can build up in the system. Flushing the cooling system should be done every 30,000 miles or so.

By following these tips, you can help to keep your 2009 Nissan Murano’s coolant filler neck in good condition and ensure that your engine stays cool and running smoothly.

My Buying Guides on ‘2009 Nissan Murano Coolant Filler Neck’

The coolant filler neck on a 2009 Nissan Murano is a small, but important, part of the cooling system. It is responsible for filling the radiator with coolant and preventing air from getting into the system. If the coolant filler neck fails, it can cause the engine to overheat and potentially damage the engine.

Symptoms of a Failed Coolant Filler Neck

There are a few symptoms that can indicate that the coolant filler neck on your 2009 Nissan Murano is failing. These include:

  • The engine overheating
  • A coolant leak
  • Steam coming from under the hood
  • A burning smell

If you notice any of these symptoms, it is important to have the coolant filler neck checked by a qualified mechanic as soon as possible.

How to Choose the Right Coolant Filler Neck for Your 2009 Nissan Murano

When choosing a coolant filler neck for your 2009 Nissan Murano, it is important to make sure that you get the correct part for your vehicle. The coolant filler neck is a specific part that is designed for your particular model and year of vehicle. If you get the wrong part, it may not fit properly or may not work correctly.

To find the correct coolant filler neck for your 2009 Nissan Murano, you can use the following resources:

  • Your vehicle’s owner’s manual
  • A parts catalog
  • An online parts store

Once you have the correct part number, you can order the coolant filler neck from a parts store or online retailer.

How to Install a Coolant Filler Neck on a 2009 Nissan Murano

Installing a coolant filler neck on a 2009 Nissan Murano is a relatively simple task that can be completed in about 30 minutes. However, it is important to follow the steps carefully to avoid damaging the part or the vehicle.

To install a coolant filler neck on a 2009 Nissan Murano, you will need the following tools:

  • A wrench
  • A screwdriver
  • A new coolant filler neck
  • A new gasket
  • Coolant

Step 1: Drain the Coolant

The first step is to drain the coolant from the radiator. To do this, you will need to locate the radiator drain plug and remove it. Once the coolant has drained, you can replace the drain plug.

Step 2: Remove the Old Coolant Filler Neck

The next step is to remove the old coolant filler neck. To do this, you will need to use a wrench to loosen the bolts that hold the coolant filler neck in place. Once the bolts are loose, you can carefully remove the coolant filler neck.

Step 3: Install the New Coolant Filler Neck

The next step is to install the new coolant filler neck. To do this, you will need to apply a thin coat of sealant to the gasket. Once the sealant is applied, you can carefully install the new coolant filler neck. Make sure that the bolts are tight enough to hold the coolant filler neck in place, but not so tight that you damage the threads.

Step 4: Fill the Radiator with Coolant

The final step is to fill the radiator with coolant. To do this, you will need to open the radiator cap and pour coolant into the radiator until it is full. Once the radiator is full, you can close the radiator cap.

Step 5: Start the Engine and Check for Leaks

Once you have installed the new coolant filler neck, you should start the engine and check for leaks. If you see any leaks, you will need to tighten the bolts on the coolant filler neck until the leaks stop.

Installing a coolant filler neck on a 2009 Nissan Murano is a relatively simple task that can be completed in about 30 minutes. However, it is important to follow the steps carefully to avoid damaging the part or the vehicle. If you are not comfortable doing this type of work, you should have a qualified mechanic install the coolant filler neck for you.

Author Profile

Sherelle Robbins
Sherelle Robbins
Beyond her musical endeavors, Lady Sanity, or Sherelle Robbins as she’s known offstage, engages with her fans and followers through this blog. Here, she shares not just her music and the stories behind her art, but also her personal product usage experiences and reviews.

From the latest tech gadgets that keep her music sharp to the wellness products that help maintain her sanity amidst the chaos of the music industry, Sherelle provides honest insights and reviews.

This blog is a window into the world of Lady Sanity. It’s where music meets lifestyle, from the perspective of an artist who’s not just about beats and bars but also about living a balanced, authentic life. Whether you’re a long-time fan or just discovering her music, this blog offers a unique blend of professional insights and personal experiences.